Winch Disassembly

3-14.

Winch

Disassembly

increase pressure, remove washers to decrease

pressure. The relief is as follows: 225 psi at

a . Power Takeoff Assembly REmoval. Unbolt the

6½ gpm-1,000rpm-Oil Temperature 70°.

power takeoff bearing carrier (fig. 3-7) and remove

(b) To check quick release valve spring (2),

the complete power takeoff assembly. Be careful

remove fitting (4) and piston (3).

not to damage shims behind bearing carrier.

(c) A f t e r c h e c k i n g a n d c l e a n i n g a l l p a r t s

thorouhly, lubricate with SAE No. 10 engine oil

a n d assemble in the reverse order of disassembly.

Replace pistons (19) and (3) with new parts if there

are deep nicks, a n d remove light nicks by lapping.