 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
  TM 10-3930-626-12
manufacturer's mounting and safety
(3). Delete sub-paragraph b. (1) and renumber
sub-paragraphs (2) and (3).
instructions. Failure to do so could
cause serious injury or loss of life.
(4). Add the following to sub-paragraph b. (3):
Reference TM 9-2610-200-24 CARE, MAINTE-
WARNING
NANCE, AND REPAIR OF PNEUMATIC
Never inflate tires over 40 PSI to seat
TIRES AND INNER TUBES for additional in-
tire bead. Serious injury or loss of
formation concerning tire maintenance.
life could result.
(5). Add the following WARNINGS prior to sub-
WARNING
paragraph c:
When inflating tires in a safety cage,
WARNING
always use an extension air hose and
Always use an inflation safety cage
gage for safety cage use. Failure to
to inflate tires mounted on multi-
do so could cause serious injury.
piece rims and tire/rim assemblies
(6). Change sub-paragraph c. to read;
not mounted on tires changing ma-
chine that has a positive lock down
C. Installation. Using tire lubricant, assem-
device designed to hold the assem-
ble the tire and rim components. Inspect the
bly during inflation. . When using a
wheel assembly to insure all components are
tire changing machine, always follow
properly installed. Place wheel assembly in
manufacturer mounting and safety
safety cage and using an extension airhose
instruction. Failure to do so could
and gage, inflate tire to a maximum of 15 PSI,
cause serious injury or loss of life.
and allow tube to center itself in the tire. In-
flate tire not to exceed 40 PSI to seat both tire
WARNING
beads. Both tire beads should seat properly
Never inflate tires over 40 PSI to seat
before reaching 40 PSI. If tire beads fail to
tire beads. serious injury or loss of
seat, deflate tire, determine cause, take cor-
life could result.
rective action, add additional tire bead lubri-
cant and inflate to recommended pressure.
WARNING
When inflating tire in a safety cage,
Page 4-50, paragraph 4-62. "Drive wheel and
always use an extension airhose and
Tires":
gage for safety cage use. Failure to
do so could cause serious injury.
(l). After sub-Paragraph a.(2) add the follow-
ing note :
NOTE
(6). Change sub-paragraph c. to read:
Removal may be easier if weight of wheel
is supported by a wheeled floor jack or
Using tire lubricant, assemble the tire and
dolly
rim components, Inspect the wheel to insure
all components are properly installed. Place
(2). After sub-paragraph a. (3) add the following
wheel assembly in safety cage and using an
WARNING:
extension airhose and gage, inflate tire to a
maximum of 15 PSI, and allow tire to com-
pletely deflate. This will allow the tube to cen-
WARNING
ter itself in the tire. Inflate tire not to exceed
Be sure tire is fully deflated before
40 PSI to seat both tire beads. Both tire beads
proceeding with next step. Failure to
should seat properly before reaching 40 PSI.
do so could result in injury or death.
If tire beads fail to seat, deflate tire, determine
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals