GENERAL INFORMATION

TM 5-3895-383-24P A-4 GENERAL INFORMATION KEBP0206-02 GENERAL INFORMATION 9. NON-SERVICED PARTS In some instances it is necessary to display non- serviced parts that are a link to lower level serviceable consist lists. These non-serviced part numbers are shown in italic type indicating that they are not available. 10. PARTS LIST REFERENCE NUMBERS Numbers shown in the Ref No column correspond to numbers used in the associated graphic(s). An alphabetic suffix may be added to a reference number to identify lower level consist items. Numbers shown in the Graphic Ref column refer to the graphic number identifier displayed in the lower left corner of each illustration. The Graphic Ref number may be used in combination with the item Ref No to determine the correct part number. There may be intentional omission of a Ref No in a consist list as information is updated to reflect the latest serviceable part numbers. 11. INDENTED PART NAMES When a part name is indented in a parts list, it is part of (included in) the group or assembly under which it is indented. 12. ILLUSTRATION REFERENCE LETTERS When necessary, illustrations contain reference letters (A, B, C etc.) that are intended to track lines and harnesses from one point to another. They are also used to show where to reconnect illustrations that have been separated. 13. ABBREVIATIONS AND SYMBOLS O.D. – Outside Diameter I.D. – Inside Diameter A – Not Part Of This Group B – Use As Required C – Change From Previous Type D – Order By The Meter E – Order By The Centimeter F – Not Shown G – Order By The Inch I – See Hose Fabrication Guide M – Metric Part R – Remfg Part May Be Available Y – Separate Illustration Z – Not Serviced Separately NOTE: Continuing improvement and advancement of product design may cause changes to your machine which may not be included in this publication. Whenever a question arises regarding your Caterpillar product or this publication, please consult your Caterpillar dealer for the latest available information.