Relief Valve

(4) Set both jam nuts on set screws (1

and 2).

(5) Fill and bleed hydraulic system (para

6-14. Relief Valve

a. Removal and Installation. Refer to para-

graph 3-26 to remove and install the relief valve.

b. Disassembly and Reassembly. Refer to fig-

ure 6-12, items 1 through 14 to disassemble and

reassemble the relief valve.

c. Cleaning, Inspection, and Repair.

(1) Clean parts with an approved cleaning

solvent and dry thoroughly.

(2) Inspect parts for cracks, breaks, or

other damage. Replace any defective parts.

MEC 3895-265-15/43

Transmitter handle adjustment.

Figure 6-13.

6-13

AGO 20049A