LO 5-3895-373-12
Note 1
10 HOURS
CONVEYOR IDLER BEARING UNITS
A
Fully open hopper wings per TM 5-3895-373-10.
B
Tilt hinged wing plates (1) open on hopper wings
(2).
C
Tilt conveyor access door (3) forward to access
conveyor idler bearing units (4).
D
Lubricate four conveyor idler bearing units (4)
with GAA.
E
Lower conveyor access door (3) over conveyor
idler bearing units (4).
F
Tilt hinged wing plates (1) closed on hopper
wing (2).
G
Fully close hopper wings per TM 5-3895-373-10.
Note 2
10 HOURS
CONVEYOR DRIVE BEARING UNITS
Lubricate four fittings with GAA.
(two left conveyor, two right conveyor)
Card 8 of 28