|
| |
TM 9-2320-364-20-4
12-55
NOTE
Mark position of fittings before
removal.
(5)
Remove two elbows (3) from adapters (12).
(6)
Remove two adapters (12) from service relay
valve (8).
(7)
Remove two plugs (13) from service relay
valve (8).
(8)
Remove elbow (5) from service relay
valve (8).
(9)
Remove elbow (11) from service relay
valve (8).
NOTE
Perform Step (10) if installing
new service relay valve.
(10)
Remove two screws (14), lockwashers (15)
and service relay valve mounting
bracket (16) from service relay valve (8).
Discard lockwashers.
b.
Installation.
NOTE
Use existing screws to mount service relay mounting bracket.
Perform Step (1) only if installing new service relay valve.
(1)
Remove two screws (14) and lockwashers (15) from service relay valve (8). Discard lockwasher.
(2)
Install service relay valve mounting bracket (16), two lockwashers (15) and screws (14) on service relay
valve (8).
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors, and
are harmful to skin and clothing. To avoid injury or death, keep away from open fire and use
in well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing,
wash immediately with soap and water.
(3)
Apply sealing compound on threads of elbow (11).
(4)
Install elbow (11) in service relay valve (8).
(5)
Apply sealing compound on threads of elbow (5).
(6)
Install elbow (5) in service relay valve (8).
(7)
Apply sealing compound on threads of two plugs (13).
|
