TM 9-6230-210-13&P
c.
d.
Operate handle of oil can two or three times to Iubricate jack assembly (1).
Lubricate entire length of outside surface of inner ram (4) with oil.
e. Lubricate three remaining jacks in the same manner.
REPLACE
LEGEND
1 NUT
2 BOLT
3 FOOT
4 NUT
5 WASHER
6 BOLT
7 JACK
8 OUTRIGGER
a. Remove nut (1) and bolt (2).
b. Remove foot (3).
c. Remove two nuts (4) three lockwashers (5) and bobs (6).
d. Lift leveling jack (7) to remove from outrigger (8).
e. Remove remaining jacks in the same manner.
f. Replace unserviceable leveling jacks with serviceable items from stock.
g. Install Ieveling jack (7) through hole on end of outrigger.
h. Install two bolts (6), lockwashers (5), and nuts (4) in outer hole and tighten.
i. Install lockwasher (5) and bolt (6) in inner hole and tighten,
j. Install foot (3) on jack.
k. Install bolt (2) and nut (1) and tighten.
l. Install remaining jacks in same manner.
4-73