TM 10-3930-664-24 WARNING Rollover  protection  structure  is  very heavy  and  awkward.    Enlist  the  help of    an     aide     when     removing     from chassis to prevent injury to personnel and damage to forklift components. 6. Install    sling    onto    top    of    ROPS        frame    (5). Tighten  sling.    Connect  hoist  to  sling  and  lift  to take up slack. 7. Remove ROPS frame (5) from forklift chassis by removing screws (21, 22), washers (23, 24), and nuts (25). B.  CLEANING Clean ROPS frame and related components in accordance with paragraph 1-24. C.  INSPECTION 1. Inspect ROPS frame and related components in accordance with paragraph 1-24. 2. Repair frame in accordance with TB 9-2300-247- 40. D.  INSTALLATION WARNING Rollover  protection  structure  is  very heavy  and  awkward.    Enlist  the  help of     an     aide     when     installing     onto chassis to prevent injury to personnel and damage to forklift components. 1. Using   hoist,   lift   ROPS   frame   (5)   and   position onto  forklift  chassis.    Secure  using  screws  (21, 22), washers (23, 24), and nuts (25). 3-181