TM 10-3930-664-24 2. Remove   screws   (4,   5,   6)   and   washers   (7,   8) from oil charging pump (9). 3. Carefully  separate  oil  charging  pump   (9)   from transmission  (11).    Remove  and  discard  gasket (10). B. CLEANING Clean    oil    charging    pump    and    transmission    bore    in accordance with paragraph 1-24. C. INSPECTION Inspect   oil   charging   pump   and   transmission   bore   in accordance with paragraph 1-24. D. INSTALLATION 1. Mate new gasket (10) to oil charging pump (9). 2. Install         oil      charging         pump         (9)      into transmission (11), ensuring that pump drive gear meshes with idler gear in transmission. 3. Install   screws   (4,   5,   6)   and   washers   (7,   8). Torque screws (4, 5) to 16 to 20 ft-lbs (22 to 27 Nm).  Torque long screw (6) to 26 to 29 ft-lbs (35 to 39 Nm). 4. Apply loctite to threads of nine screws (2). Install top   transmission   cover   (1)   using   screws   and washers (3). FOLLOW-ON MAINTENANCE: None END OF TASK 3-124