| |
TM 10-3930-664-24
2-107. DISC BRAKE ASSEMBLY ADJUSTMENT
This task covers: Adjustment
INITIAL SETUP:
Tools and Test Equipment:
General Mechanics Tool Kit (1, App. E)
A. ADJUSTMENT
1.
Locate three adjusting bolts (1) on axle case.
These bolts are used to adjust brake disc gap.
2.
Loosen locknut (2) on all three bolts (1).
3.
Turn bolts (I) counterclockwise until tight. Back
off bolts one full turn. Tighten locknuts (2).
4.
This adjustment will result in a gap of 0.04 inch
(1.0 mm) between brake discs.
FOLLOW-ON MAINTENANCE:
None
END OF TASK
2-294
|
