CLUTCH PACK HUB AND DRUM, PISTON AND DISC ASSEMBLY - continued

STEP 13. Install a steel disc plate, then a

bronze disc plate alternate In this manner until

the appropriate number of plates have been

installed.

Install the end plate and retainer

STEP 14.

ring.

STEP 15. Now turn the drun assembly over and

complete steps 8 - 9 - 10 - 11 - 12 - 13 and 14.

Both sides of the drum assemble the same.

Step 13 - 14 - 15. Plate 8040

STEP 16. Install the clutch pack assembly tool

STEP 17. Install the inner thrust washer with

through the clutch hub, the tool will only fit

its grooves up . . . . . using the tool as a guide.

one way because of index splines. The part

number of this tool is 801435.

Step 17. Plate 10348

Step 16. Plate 10347

5-80N