TM  10-3930-638-24&P 2-53.  BODY,  CAB  AND  HOOD  MAINTENANCE  (cont) b. Fenders. This task covers: a..  Removal c. Inspection b. Cleaning d. Installation INITIAL SETUP TOOLS EQUIPMENT CONDITION No. 1 Common Organiza- NSN  4910-00-754-0654 Paragraph Condition  Description tional Maintenance Tool fit Vehicle parked on level surface, engine off, and parking brake applied. MATERIALS/PARTS 2-53c Side panels removed. Cleaning  solvent  P-D-680 Clean  cloths Stiff wire brush STEP LOCATION ITEM ACTION REMARKS REMOVAL 1 Chassis front left a. Two nuts(1) Remove or right side b. Two lock washers (2) Remove c. Two cap screws (3) Remove d. Two washers (4) Remove 2 Console  support a. Nut (5), lock washer Remove bracket, left or (6), and cap screw (7) right  side b. Nut (9) Loosen c. Fender (8) Pull out slightly Cap screw (11), washer (12), lock washer and  remove (10) and nut (9) will disengage from slot in console support bracket 3 Left or right a. Nut (9), lock washer Remove front fender (10),  cap  screw(11), (8) and  washer  (12) b. TWO plugs  (13) Remove 4 Engine  compart- a. Five nuts (14), lock Remove Disconnect hourmeter ground wire when ment, rear, left washers  (15),  cap removing  rear  left  fender or right side screws (16), and nine  washers  (17) b. Fender (18) Remove 2-367