Engine Mount (cont). - TM-10-3930-638-24-P0545

TM 10-3930-638-24&P

3-5. ENGINE MAINTENANCE (cont)

b. Engine Mount (cont).

ITEM

REMARKS

ACTION

STEP

LOCATION

INSPECTION

Engine, rear

Engine mount (6)

Replace if cracked, chipped, or split

Inspect

REMOVAL

Engine, rear

a. Lock nut (1) and

Loosen and

Discard lock nut (1)

washer (2)

remove

WARNING

Keep hands and body clear while engine is being raised. Failure

to do so could cause serious injury or death due to engine

falling. When engine mount bracket is clear of frame, support

engine using blocks to prevent engine from falling while replacing

mount (6).

NOTE

Loosen two transmission mounts mounting bolts before

performing following step.

Lift

Using sling and hoist. Lift until mount (6)

b. Rear of engine

will clear frame and engine mount bracket

c. Cap screw (4) and

Remove

washers (3 and 5)

From engine mount bracket

Remove and

d. Rubber mount (6)

discard

CLEANING

WARNING

Dry cleaning solvent (P-D-680), used to clean parts is toxic and

flammable. Wear protective goggles and gloves and use only in a

well ventilated area. Avoid contact with skin, eyes, and clothes

and don't breathe vapors. Do not use near open flame or

excessive heat and don't smoke when using it. Failure to do so

could cause serious injury. If you become dizzy while using

cleaning solvent, get fresh air immediately, and get medical

attention. If contact with skin or clothes is made, flush with large

amounts of water. If contact with eyes is made, wash eyes with

water immediately, and obtain medical aid immediately.

WARNING

Wear safety glasses when drying parts with compressed air.

Failure to do so could cause serious injury to eyes and possible

blindness. If you hurt your eyes or if a foreign object is blown into

your eyes, seek medical attention immediately.

3-39