Table 3-2. Troubleshooting Procedures

TM 5-3805-274-10 Table 3-2. Troubleshooting Procedures - Continued MALFUNCTION TEST OR INSPECTION CORRECTIVE ACTION HYDRAULIC SYSTEM (Continued) 4. BODY WON’T RAISE WHEN CONTROL PLACED IN UP POSITION. Step 1. Check that PTO is engaged. Engage PTO (see TM 9-2320-273-10). Step 2. Check hydraulic oil level (see Table 3-1, item 15). Add oil if necessary. Step 3. Check mechanical linkage between cab control and control valve for loose connection. Notify Organizational Maintenance if linkage is loose. Step 4. Check for leaks in the hydraulic components and lines. Notify Organizational Maintenance if leaks are evident. 5. DUMP BODY RESPONSE TO CONTROLS IS SLUGGISH. Step 1. Check hydraulic filter service indication gage. Notify Organizational Maintenance if gage needle is in the red range. Step 2. Check hydraulic oil level (see Table 3-1, item 15). Add oil if necessary. Step 3. Check for leaks. Notify Organizational Maintenance if Class III leaks are evident. 3-16