|
| |
Back
OPERATING CARGO COVER | Up
TM-5-3805-264-14P Truck Dump Heavy Body M917A1 and M917A1 W/MCS (Material Control System) Manual | Next
OPERATING BODY PROPS |
TM 5-3805-264-14&P
2-14.
OPERATING CARGO COVER (Con’t).
b.
Covering Load.
DO NOT cover load with crank handle installed. Failure to follow this warning may
result in injury to personnel.
(1)
Ensure that crank handle (1) is NOT installed.
(2)
Quickly pull cargo cover control handle (3) to farthest down BRAKE position.
DO NOT let go of cargo cover control handle until cargo cover is fully over load.
Handle provides braking action for cargo cover swing. If you let go of handle before
cargo cover is over load, damage to crank assembly may result.
(3)
Carefully lift cargo cover control handle (3) toward RELEASE position until cargo cover
begins to move. Keep hand on handle so that cover moves slowly. If cargo cover moves too fast, pull handle down
slightly to apply brakes.
(4)
When cargo cover is fully over load, release cargo cover control handle (3). Handle will
return to top LOCK position.
2-37
|
