|
| |
Back
CONTROLLED SPREADING (M917A1 W/MCS) (Con’t) | Up
TM-5-3805-264-14P Truck Dump Heavy Body M917A1 and M917A1 W/MCS (Material Control System) Manual | Next
Covering Load. |
TM 5-3805-264-14&P
2-14.
OPERATING CARGO COVER.
Observe the following safety regulations when operating cargo cover:
Never operate system under obstructions, such as trees and power lines.
Ensure that all personnel are clear of rear of dump body and the immediate
area of the cover.
Ensure that chain cover is in place.
Keep all clothing away from moving parts.
DO NOT cover load with crank handle installed.
Failure to follow this warning may result in death or Injury to personnel.
DO NOT attempt to uncover load without first removing any snow or water that has
accumulated on cargo cover. Cargo cover may be damaged if this caution is not fol-
lowed.
a.
Uncovering Load.
(1)
Remove crank handle (1) from storage pouch in BII box.
(2)
Install crank handle (1) on crank shaft (2). Turn handle clockwise to roll up cargo cover,
You can stop at any time and mechanism will hold cover in place.
(3)
Stop cranking when cargo cover is completely rolled up.
(4)
Remove crank handle (1) and stow.
2-36
|
