DUMPING LOAD (Con’t).

TM 5-3805-264-14&P 2-10. DUMPING LOAD (Con’t). (3) Secure mud flaps (1) out of way on hooks (2) when stockpiling or when dumping into a spreader. Adjustment chains are intended for use only during spreading operations. If used when stockpiling, damage to chains or tail- gate may result. (4) Adjust tailgate opening if required (paragraph 2-11). (5) Uncover load (paragraph 2-14). (6) Start engine (TM 9-2320-363- 10). (7) Place main light switch (6) is in SER DRIVE or STOP LIGHT position (TM 9-2320-363- 10). (8) Engage PTO (TM 9-2320-363- 10). (9) Check that body (transport) lock indicator light (4) is not lit. NEVER unlock tailgate or operate MCS gates, or operate hydraulic control lever in cab without first ensuring that all personnel are clear of dump body. Failure to fol- low this warning may result in injury to personnel. Ensure that tailgate latches are fully opened before raising dump body. Failure to follow this caution could result in damage to equipment. 2-28