TM 5-3805-254-34P sequence.  The NIIN consists of the last nine NSN                 I                   digits of the NSN (i.e.,  5305-01-674-1467).    When NIIN using  this  column  to  locate  an  item,  ignore  the  first  4 digits of the NSN.  However, the complete NSN should be used when ordering items by stock number. (2) FIG.      column.      This   column   lists   the number of the figure where the item is identified/located. The  figures  are  in  numerical  order  in  Section  II  and Section III. (3) ITEM column.  The item number identifies the item associated with the figure listed in the adjacent FIG.    column.    This  item  is  also  identified  by  the  NSN listed on the same line. b. PARTNUMBER  INDEX.    Part  numbers  in  this index     are     listed     by     part     number     in     ascending alphanumeric   sequence   (i.e.,   vertical   arrangement   of letter  and  number  combination  which  places  the  first letter   or   digit   of   each   group   in   order   A   through   Z, followed by the numbers 0 through 9 and each following letter or digit in like order). (1) CAGEC   column.      The   Commercial   and Government    Entity    (CAGE)    Code    (C)    is    a    5-digit alphanumeric  code  used  to  identify  the  manufacturer, distributor,  or  Government  agency,  etc.,  that  supplies the item. (2) PART   NUMBER   column.      Indicates   the primary  number  used  by  the  manufacturer  (individual, firm,    corporation,    or    Government    activity),    which controls  the  design  and  characteristics  of  the  item  by means    of    its    engineering    drawings,    specifications standards,  and  inspection  requirements  to  identify  an item or range of items. (3) STOCK  NUMBER  column.    This  column lists   the   NSN   for   the   associated   part   number   and manufacturer   identified   in   the   PART   NUMBER   and CAGE columns to the left. (4) FIG.      column.      This   column   lists   the number of the figure where the item is identified/located in Sec- tions II and III. (5)  ITEM  column.      The   item   number   is   that number assigned to the item as it appears in the figure referenced in the adjacent figure number column. c. FIGURE AND ITEM NUMBER INDEX. (1) FIG.      column.      This   column   lists   the number of the figure where the item is identified/located in Sec- tions II and III. (2) ITEM  column.    The  item  number  is  that number assigned to the item as it appears in the figure referenced in the adjacent figure number column. (3) STOCK  NUMBER  column.    This  column lists the NSN for the item. (4) CAGE    column.        The    Commercial    and Government  Entity  (CAGE)  is  a  5-digit  alphanumeric code  used  to  identify  the  manufacturer,  distributor,  or Government agency, etc., that supplies the item. (5) PART   NUMBER   column.      Indicates   the primary  number  used  by  the  manufacturer  (individual, firm,    corporation,    or    Government    activity),    which controls  the  design  and  characteristics  of  the  item  by means    of    its    engineering    drawings,    specifications standards   and   inspection   requirements   to   identify   an item or range of items. 5.  Special Information. a. USABLE   ON   CODE.      The   usable   on   code appears   in   the   lower   left   corner   of   the   Description column heading.  Not Applicable. b. FABRICATION INSTRUCTIONS. Bulk materials required to manufacture items are listed in the Bulk  Material  Functional  Group  of  this  RPSTL.    Part numbers  for  bulk  materials  are  also  referenced  in  the Description column of the line item entry for the item to be     manufactured/fabricated.          Detailed     fabrication instructions for items source coded to be manufactured or fabricated are found in TM 5-3805-254-20 and TM 5- 3805-254-34. c. ASSEMBLY INSTRUCTIONS. Detailed assembly   instructions   for   items   source   coded   to   be assembled from component spare/repair parts are found in TM 5-3805-254-20 and TM 5-3805-254-34.  Items that make up the assembly are listed immediately following the  assembly  item  entry  or  reference  is  made  to  an applicable figure. d. KITS.    Line  item  entries  for  repair  parts  kits appear in group 9401 in Section II. e. INDEX NUMBERS.  Items which have the word BULK  in  the  figure  column  will  have  an  index  number shown in the item number column.  This index number is    a    cross-reference    between    the    National    Stock Number/Part Number Index and the bulk material list in Section II. f. ASSOCIATED  PUBLICATIONS.    The  publica- tions  listed  below  pertain  to  the  Dump  Truck  and  its components: 4