|
| |
Back
FOLLOW-ON TASKS-cont. | Up
TM-5-3805-254-34 Truck Dump 20-Ton 6x4 On-Off Highway 71 000 GVW IHC Model F-5070 (CCE) Manual | Next
FOLLOW-ON TASKS |
TM 5-3805-254-34
4-2.
SHUTTERSTAT REPLACEMENT.
This Task Covers:
a. Removal
b. Installation
Initial Setup:
Equipment Conditions:
Tools/Test Equipment:
• Left hood opened (see TM 5-3805-254-10).
• General mechanic's tool kit
a.
REMOVAL
1.
Disconnect air cylinder-to-draincock hose assembly (1) from elbow (19) and connector (2).
2.
Remove two screws (20), clamps (21), and air cylinder-to-draincock hose assembly (1).
3.
Remove elbow (19) from pipe elbow (18).
4.
Remove pipe elbow (18) from air cylinder (17).
5.
Disconnect hose assembly (7) from elbow (12) and elbow (8).
6.
Remove nut (10), screw (15), clamp (14), and hose assembly (7) from engine (9).
7.
Remove screw (16) and extension (11) from engine (9).
8.
Remove elbow (12) from air manifold (13)
9.
Remove elbow (8) from check valve (6).
10.
Remove check valve (6) from shutterstat (5).
11.
Remove connector (2), draincock (3), and tee (4) from shutterstat (5).
12.
Remove shutterstat (5) and reducer (22) from engine (9).
b.
INSTALLATION
1.
Install reducer (22) one engine (9).
2.
Install shutterstat (5) on reducer (22).
3.
Install tee (4), draincock (3), and connector (2) on shutterstat (5).
4.
Install check valve (6) on shutterstat (5).
5.
Install elbow (8) on check valve (6).
6.
Install elbow (12) in air manifold (13).
7.
Install extension (11) on engine (9) with screw (16).
8.
Connect hose assembly (7) to elbow (8), and elbow (12), and install on engine with clamp (14), screw (15), and
nut (10).
9.
Install pipe elbow (18) on air cylinder (17).
4-10
|
