|
| |
Back
ENGINE OIL IN COOLANT OR COOLANT IN ENGINE OIL | Up
TM-5-3805-254-34 Truck Dump 20-Ton 6x4 On-Off Highway 71 000 GVW IHC Model F-5070 (CCE) Manual | Next
COOLANT TEMPERATURE ABOVE NORMAL |
TM 5-3805-254-34
Table 2-1. Troubleshooting (Con’t).
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
6.
EXCESSIVE ENGINE NOISE.
Inspect for internal engine wear and damage to main bearings, connecting rods, camshafts, and journals (see
TM 5-2815-241-34&P).
Replace engine (see paragraph 3-1).
7. EXCESSIVE ENGINE VIBRATION.
Step 1.
Inspect for faulty vibration damper (see TM 5-2815-241-34&P).
Replace vibration damper (see TM 5-2815-241-34&P).
Step 2.
Inspect for loose and damaged engine mounts (see paragraph 3-3).
Tighten or replace engine mounts (see paragraph 3-3).
Step 3.
Inspect for loose flywheel (see paragraph 6-10).
Tighten flywheel (see paragraph 6-10).
ENGINE COMPRESSION BRAKE
8. ENGINE COMPRESSION BRAKE ENGAGED WITH SWITCH IN "OFF" POSITION.
Step 1.
Inspect for solenoid valve plunger stuck in ON position (see TM 5-2815-241-34&P).
Replace solenoid valve (see TM 5-2815-241-34&P).
Step 2.
Inspect for faulty solenoid valve seals (see TM 5-2815-241-34&P).
Replace solenoid valve seals (see TM 5-2815-241-34&P).
Step 3.
Inspect for broken control valve spring (see TM 5-2815-241-34&P).
Replace control valve spring (see TM 5-2815-241-34&P).
Step 4.
Inspect for control valve stuck in ON position (see TM 5-2815-241-34&P).
Free or replace control valve (see TM 5-2815-241-34&P).
9. ENGINE COMPRESSION BRAKE WEAK OR SLOW TO ACTIVATE.
Step 1.
Inspect for sticking slave piston (see TM 5-2815-241-34&P).
Free or replace slave piston (see TM 5-2815-241-34&P).
Step 2.
Inspect for broken control valve spring (see TM 5-2815-241-34&P).
Replace control valve spring (see TM 5-2815-241-34&P).
2-5
|
