REMOVAL

TM 5-3805-254-20-2 SECONDARY MAGNETIC SWITCH - CONTINUED INITIAL SETUP Tools Personnel Required Wrench, box-end, 11/32-inch One ’ Wrench, box-end, 7116-inch Wrench, box-end, 5/8-inch Equipment Condition Wrench, open-end, 7/16-inch Battery ground cable disconnected Materials/Parts (page 2-424). Right cab door opened (page 2-424). Lockwasher, mounting (two required) Instrument panel pad removed (page 2-424). Lockwasher, small (two required) Lockwasher, large (two required) Tags, marker (item 21, appendix C) ACTION LOCATION ITEM REMARKS REMOVAL CAUTION Use care when working behind instrument panel pad to prevent breaking or disconnecting wires. 1. Secondary magnetic Nut (2), wire (3), a. Tag wire (page 2-424). switch (1) and two lock- b. Using 11/32-inch box-end wrench, un- washers (4) screw and take out. c. Get rid of lockwashers. 2. Two nuts (5), four a. Tag wires (page 2-424). wires (6), and two b. Using 5/8-inch box-end wrench, un- lockwashers (7) screw and take out. c. Get rid of lockwashers. 3. Two screws (8), two a. Using 7116-inch box-end and 7/16-inch lockwashers (9), and open-end wrenches, unscrew and take two nuts (10) out. b. Get rid of lockwashers. INSTALLATION CAUTION Use care when working behind instrument panel pad to prevent breaking or disconnecting wires. 2-704