CLEANING

TM 5-3805-254-20-2 GENERATOR PULLEY - CONTINUED ACTION LOCATION ITEM REMARKS REMOVAL - CONTINUED 2. Armature (1) Generator pulley (2) Using mechanical puller, pull off. CLEANING WARNING Drycleaning solvent P-D-680 is toxic and flammable. Wear protective safety goggles and gloves and use only in a well-ventilated area. Avoid contact with skin, eyes, and clothes and do not breathe vapors. Do not use near open flame or excessive heat. The flashpoint for type #1 drycleaning solvent is 100°F (38°C) and for type #2 is 138°F (59°C). If you become dizzy while using cleaning solvent, get fresh air immediately, and get medical aid. If contact with eyes is made, flush your eyes with water and get medical aid immediately. NOTE Parts must be cleaned thoroughly. For more information on how to clean parts, go to General Maintenance Instructions (page 2-424). 3. All parts Using drycleaning solvent, clean thoroughly. WARNING Particles blown by compressed air are hazardous. Make certain the air stream is directed away from user and other personnel in the area. Compressed air used for cleaning purposes shall not exceed 30 psi (207 kPa). User must wear safety goggles or face shield to prevent injury to personnel. 4. All parts Using air blow gun and air hose assembly, blow dry. INSPECTION/REPLACEMENT NOTE Replace all damaged or defective parts. For more information on how to inspect parts, go to General Maintenance Instructions (page 2-424). 2-672