ENGINE FULL-FLOW OIL FILTER

TM 5-3805-254-20-1 ENGINE FULL-FLOW OIL FILTER This task covers: a. Draining (page 2-6) d. Installation (page 2-8) b. Removal (page 2-7) e. Filling (page 2-8) c. Cleaning (page 2-8) INITIAL SETUP: Tools Materials/Parts - Continued Container, 10-gallon Rags, wiping (item 15, appendix C) Extension, 6-inch, 1/2-inch drive Solvent, drycleaning (item 19, appendix C) Handle, ratchet, 112-inch drive Socket, 9/16-inch, 1/2-inch drive Personnel Required Wrench, box-end, 7/16-inch One Materials/Parts Equipment Condition Oil filter element with packing Oil, lubricating (item 14, appendic C) Right and left side hood panels opened (page 2-424). ACTION LOCATION ITEM REMARKS DRAINING WARNING Safety goggles must be worn when working under truck to prevent eye injury. Hot engine oil could burn you. Care must be taken to prevent personnel injury. NOTE Engine oil must be warm and engine shut down (TM 5-3805-254-10) before draining oil. 1. Shell (1) Pipe plug (2) a. Place 10-gallon container underneath. b. Using 7/16-inch box-end wrench, unscrew and take out. c. Allow oil to drain. d. Get rid of drained oil (page 2-424). 2-6