TM-5-3820-205-10-10001.gif
TM-5-3820-205-10-10002.gif
TM-5-3820-205-10-10003.gif
TM-5-3820-205-10-10004.gif
TM-5-3820-205-10-10005.gif

Tm-5-3820-205-10-1

• Chapter 1 Introduction
  • Figure 1. Roll Crusher, Left Rear, Three-Quarter View (Model 523b, C)
  • 4. Aggregate Crushing And Screening Plant
  • Figure 3. Aggregate Flow Diagram And Typical Crushing And Screening Plant Layout.
  • B. Tabulated Data
  • 6. Differences Between Models
• Chapter 2 Installation And Operation Instructions
  • Table 1. Maintenance And Operating Supplies
  • Figure 5. Leveling Jacks And Wheel Chocks Installed Position.
  • Figure 6. Drawbar Leveling Jacks, Stowed Position, Serial Numbers 6590 Through 6629
  • Figure 8. Grounding The Roll Crusher
  • Figure 10. Feeder Jumper Cable Installed On Reel.
  • Figure 12. Cables Installed On Main Control Panel (Model 5230d)
  • Figure 13. Feeder Jumper Cable Installed On Motor.
  • 10. Movement To A New Worksite
  • Figure 16. Actuating The Roll Crusher Electrical System
  • Section Ii. Controls And Instruments
  • Figure 21. Engine Indicator Panel And Throttle Knob.
  • Figure 22. Emergency Stop Button And Main Control Switch Handle
  • Figure 25. Discharge Control Handle.
  • Figure 27. Main Control Panel (Model 5230d)
  • Section Iii. Operation Of Equipment
  • Normal Readings On Gages
  • C. Cold Temperature Starting
  • 16. Operating Details
  • Figure 32. Lift Gate Assembly Operation.
  • Figure 34. Main Control Panel Switch Handle Operation.
  • 17. Operation In Extreme Cold (Below 0°F)
  • 21. Operation In Saltwater Areas
  • Section Iv. Operation Of Auxiliary Materiel Used In Conjunction With The Roll Crusher
• Chapter 3 Maintenance Instructions
  • Section Iii. Operator/Crew Preventive Maintenance Checks And Services (Pmcs)
  • Leakage Definitions For Operator/Crew Pcms
  • Main Electrical Control Panel
  • Engine Safety Controls
  • Hoppers And Chutes
  • Tires
  • 36. Engine Starts But Will Not Keep Running
  • 42. Conveyor Does Not Run Properly Or Will Not Run
  • Section V. Field Expedient Repairs
  • Figure 38. Fuel Filter Service
  • Figure 41. Filling Fuel Tank And Strainer Service
  • Figure 43. Printing The Fuel Pump
  • Section Viii. Engine Electrical System
  • 61. Batteries
  • Section Ix. Airbrake System
  • Section X. Exhaust System
  • Section Xiii. Vibrating Screen Assembly
  • 72. Vibrating Screens Replacement
  • Figure 54. Air Intake Extension Tube And Precleaner, And Exhaust Silencer Removal And Installation.
  • Section Xiv. Feeder Assembly
  • Section Xv. Rotary Elevator Assembly
  • Section Xvi. Return (Under) Conveyor Assembly
  • Section Xvii. Main (Feed) Conveyor Assembly.
  • Section Xviii. Leveling Jacks
  • Chapter 4 Demolition Of The Roll Crusher To Prevent Enemy Use
  • Figure 63. Placement Of Demolition Charges, Left Side
  • 86. Other Demolition Methods
• Appendix I References
• Appendix Ii Basic Issue Items List
  • Section Ii. Basic Issue Items List
  • Figure 65. Basic Issue Items (Con’t).
  • Figure 65. Basic Issue Items (Con’t).
  • Figure 65. Basic Issue Items (Con’t).
  • Figure 65. Basic Items (Con’t).
  • Figure 65. Basic Issue Items (Con’t).
• Index
  • Index -Cont
  • Index -Cont
  • Index -Cont
  • The Metric System And Equivalents

Privacy Statement - Press Release - Copyright Information. - Contact Us - Support Integrated Publishing