TM 5-3895-373-34 1.4 DESTRUCTION    OF    ARMY    MATERIEL    TO PREVENT ENEMY USE. Procedures  for  destruction  of  Army  materiel  to  prevent enemy use are listed in TM 750-244-6. 1.5 REPORTING EQUIPMENT IMPROVEMENT RECOMMENDATIONS (EIR). If the Paving Machine needs improvement, let  us  know. Send  us  an  EIR.    You,  the  user,  are  the  only  one  who can tell us what you don’t like about your equipment.  Let us  know  why  you  don’t  like  the  design  or  performance. Put it on an SF 368 (Product Quality Deficiency Report). Mail it to:  Commander, U. S. Army Tank-automotive and Armaments Command, Attn: AMSTA-TR-E/MPA, Warren, MI 48397-5000. 1.6 WARRANTY INFORMATION. The   Paving   Machine   warranty   is   detailed   in   Warranty Technical Bulletin (WTB) number TB 5-3895-373-14. 1.7 OFFICIAL NOMENCLATURE. This     list     provides     a     cross-reference     between     the nomenclature used in the manual and the nomenclature specified   in   the   Repair   Parts   and   Special   Tools   List (RPSTL). Nomenclature Cross-Reference List Manual Nomenclature Official Nomenclature Paving Machine 780T Bituminous Asphalt Paving Machine Screed Hydraulic Vibratory Extendable Screed, ES-80 (Diesel) Hopper Aggregate Feeder Hopper Wing Aggregate Feeder Auger Screw Conveyor Flashing Solid Rubber Sheet Dipstick Liquid Gauge Rod-cap Bendix Electric Engine Drive Coolant Temperature Thermostatic Switch Sensor Hydraulic Oil Thermostatic Switch Temperature Sensor Hemi Auger Flight Screw Conveyor Auger Quarter Auger Flight Screw Conveyor Auger Sound Foam Sound Control Batten Alternator Engine AC Generator Latch Pawl Fastener Fuel/Water Separator Fuel Filter Fuel Spray Wand Nozzle and Hose Assembly Assembly Pump Drive Gearbox Angle Drive Unit Speed Reduction Speed Gear Assembly Gearbox 1.8 USE OF METRIC UNITS. The equipment described herein contains metric components and requires metric common tools. Therefore,   metric   units   are   used   for   components   or systems  that  are  metrically  dimensioned  and  no  U.  S. standard unit is applicable.  In  all  other  situations,  U.  S. standard units and metric units are both referenced. 1.9 PREPARATION FOR STORAGE OR SHIPMENT. Requirements,  including  packaging  and   administrative, will    be    carried    out    in    accordance    with    the    Paving Machine   Organizational   Maintenance   Manual,   TM   5- 3895-373-20. 1.10 CALIBRATION. Items    requiring    calibration    are    to    be    calibrated    in accordance  with  applicable  procedures  as  described  in or referenced by this manual. a. Fuel injection pump b. Fuel injectors c. Main control handle subassembly 1-2