1.15 AUGER/CONVEYOR MOTOR.

TM 5-3895-373-34 1.15 AUGER/CONVEYOR MOTOR. The paving machine uses two auger/conveyor motors. A separate motor is used for right and left side of the paving machine and are independently controlled. The motors are powered by the left and right auxiliary hydraulic pumps. The following description applies to either motor. The auger/conveyor motor is a gear rotor type, low speed, high torque hydraulic motor. The motor is mounted on the main frame weldment inside the paving machine, above the auger/conveyor assemblies. It has a displacement of 19.9 cubic inches (326,4 ml) per revolution and operates at 2750 psi (18 961 kPa). The fixed-displacement motor is reversible and is lubricated by the hydraulic oil flowing through it. Oil flows through the gear rotor to the internal gear assembly. The internal gear assembly drives the multiple gear shaft. An internal check valve regulates case pressure. The motor drive shaft is mounted in two tandem roller bearings for a high radial load capacity and smooth operation. 1-7