|
| |
Back
b. Remove tape securing air cleaner cap assembly | Up
TM-5-3895-373-20 Bituminous Distributor Body M918 Model D-63 Manual | Next
SECTION III. PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) |
TM 5-3895-373-20
d.
Remove pressure gauges (11) from toolbox (12).
Remove protective bubble wrap material from
pressure gauges.
e.
Pressure gauges (11) shall be tagged "For Use
with 780T Paving Machine only" and properly stored in
the Organizational Maintenance Shop. Refer to TM
53895-373-24P,
Special
Tools
List
for
gauge
identification data.
2.4.3. Checking Unpacked Equipment.
a.
Inspect the equipment for damage incurred
during shipment. If the equipment has been
damaged, report the damage on SF 364, Report
of Discrepancy.
b.
Check the equipment against the packing slip to
see if the shipment is complete. Report all
discrepancies in accordance with the instructions
in DA PAM 738-750.
2.4.4. Assembly of Equipment. The paving machine is
shipped assembled and ready for use. Installation of
end-gates is required prior to paving. Installation of
paving accessories is required prior to paving extended
widths. Install the end-gates and extended-width paving
accessories per instructions in TM 5-3895-373-10.
2-5
|
