| |
Back
Review 6 Questions | Up
Construction Mechanic Basic Volume 02 - Construction methods and practices | Next
Review 5 Answers |
REVIEW 1 ANSWERS
Q1. Cross member
Q2. Monocoque
Q3. False
REVIEW 2 ANSWERS
Q1. Strut rod
Q2. Limits body roll of the vehicle during cornering
Q3. Outer end of the control rod
Q4. Double-acting, double-action type
Q5. Upper control arm
Q6. Spring rate
Q7. False
Q8. Strut spring compressor
REVIEW 3 ANSWERS
Q1. Parallelogram
Q2. False
Q3. Tie-rod assemblies
Q4. Steering linkage ratio and gear ratio of the steering mechanism
Q5. Recirculating ball
Q6. Power steering pump
Q7. Integral piston, external cylinder, and rack andpinion
Q8. Rack guide adjustment
Q9. Excessive steering wheel play
Q10. Excessively tight adjustment in the steering gearbox or linkages
REVIEW 4 ANSWERS
Q1. Acts as a soft cushion between the road and the metal wheel and provides
adequate traction with the road surface.
Q2. Tire beads, body plies, tread, sidewall, belts, and liner
Q3. Produces a harder ride at low speeds.
Q4.
Tire size, load index, speed rating, inflation pressure, and the UTQG ratings
for treadwear, traction, and temperature
Q5. Drop center
Q6. Tapered roller and ball bearing
Q7. False
8-57
|
