| |
Back
Immersion Heater | Up
Utilitiesman Volume 01 - Manual for electric, plumbing, water and other utilities | Next
Field Range Burner Unit |
Figure 2-6.—Fuel can adapter installation.
Figure 2-7.—Corrugated can, fuel fired, immersion heater.
compartment. Instructions for operation are located on
the hinged hood that covers the top of the burner.
Use the following procedures when setting up the
unit for use:
1. Place the immersion heater in a 32-gallon
corrugated can and fill it until the water is 6 inches
below the collar assembly of the heater.
2. Fill the fuel tank through the filler plug with
unleaded or regular mogas and attach the fuel tank to the
unit.
3. Assemble the four 2-foot sections of the flue
and attach them to the unit.
The following steps are for operating the
immersion heater:
1. Open the vent plug on the fuel tank and swing
the lighter cup below the drip valve.
2-12
|
