| |
Back
Figure 2-4.—Spare heater installation (Type I). | Up
Utilitiesman Volume 01 - Manual for electric, plumbing, water and other utilities | Next
Figure 2-6.—Fuel can adapter installation. |
Figure 2-5.—Space heater installation (Type II).
4. Invert the fuel can on a support no less than 1
foot or more than 8 feet above the float valve.
maintenance checks and troubleshooting procedures
are listed in Department of the Army Technical Manual,
TM 10-4500-200-13.
Preventive Maintenance and
Troubleshooting
To ensure the space heater is ready for operation at
all times, you must inspect it systematically, so the
defects may be discovered and corrected before they
result in serious damage or failure. The preventive
IMMERSION HEATER
The 32-gallon, immersion, liquid fired, water
heater used by the Naval Construction Force (NCF) is
shown in figure 2-7. The heater body is constructed of
watertight sheet steel. The combustion chamber is
doughnut-shaped, and the stack assembly is welded
together. A vertical partition divides the stack into two
sections: a burner compartment and a flue
2-11
|
