Adjustment and Orientation

TM 9-1220-238-14

position.

scale assembly as directed in Chapter 4, paragraph 4-

(3) The distance shall measure no more than two

hundred and forty (0.240) thousandths of an Inch. If the

f. Friction Pad (fig. B-6).

(1) Check the friction pad for wear and/or damage

distance is equal to or greater than specified notify

direct support personnel and replace the shoe pad as

at least once a month or as operating conditions

instructed in Chapter 4, paragraph 4-17 cord. The frame

warrants.

assembly with disk attached must be removed to

(2) Measure the distance from the face of the pad

accomplish this procedure.

mounted to the shoe to the face of the pad (24) mounted

on the upper lip of the slide (25) with the brake lever

(13) fully depressed and held in the open

3-4