|
| |
Back
FUEL FILTER ASSEMBLY REPLACEMENT AND REPAIR (CONT) | Up
TM-5-2420-224-20-2 Tractor Wheeled 4x4 DED Small Equipment Excavator (SEE) Manual | Next
COLD START AID REPLACEMENT |
TM 5-2420-224-20-2
FUEL FILTER PRE-SEDIMENT BOWL AND FILTER REPLACEMENT
This task covers:
a. Removal b. Installation
I N I T I A L S E T UP
Tools and Special Equipment:
General Safety Instructions:
Shop Equipment, SC 4910-95-CL-A74
TooI Kit, SC 5180-90-CL-N26
Materials/Parts:
Gasket
Nut, Lock
Fuel, Diesel
Appendix C, Item 18
R E M O V A L
1.
LOOSEN wing NUT (1) and REMOVE
BRACKET (2).
2.
REMOVE filter pre-sediment BOWL (3).
3.
IF DAMAGED, REMOVE filter ELEMENT (4).
4.
REMOVE GASKET (5) from housing (6).
DISCARD GASKET.
5. DISCONNECT two HOSES (7).
6.
REMOVE mounting screw (8), lock nut (9),
and HOUSING (6). DISCARD lock NUT.
1.
2.
3.
4.
5.
INSTALL HOUSING (6), mounting screw (8),
and new lock nut (9).
CONNECT two HOSES (7) to housing (6).
INSTALL new GASKET (5) in housing (6).
IF REMOVED, INSTALL new filter ELEMENT
(4) in filter pre-sediment bowl (3). FILL BOWL
(3) with clean diesel fuel.
INSTALL BOWL (3) and bracket (2) and
TIGHTEN wing NUT (1).
W A R N I N G
Diesel fuel is flammable. Do
not perform this procedure near
fire, flame, or sparks. Injury or
death to personnel could result.
4-54
INSTALLATION
|
