|
| |
Back
INSTALLATION | Up
TM-5-2420-224-20-2 Tractor Wheeled 4x4 DED Small Equipment Excavator (SEE) Manual | Next
CLUTCH MASTER CYLINDER REPLACEMENT |
TM 5-2420-224-20-2
CLUTCH SLAVE CYLINDER ADJUSTMENT
This task covers: Adjustment
I N I T I A L S E T UP
Tools and Special Equipment:
Equipment Condition:
Tool Kit, SC 5180-90-CL-N26
Reference
Condition Description
Page 4-418
Cab Tilted
1.
2.
3.
4.
5.
6.
A D J U S T M E N T
Remove spring (1) from clutch slave cylinder (2) and clutch lever (3).
Loosen lock nut (4).
Move clutch lever (3) down until it stops.
Insert a measuring device between clutch lever top surface (5) and
(6). Raise clutch lever (3). Movement of clutch lever must be 1/8 in.
Turn adjusting pin (7) to adjust clearance. When proper clearance is
Attach spring (1) to clutch slave cylinder (2) and clutch lever (3).
NOTE
Follow-on Maintenance:
Lower cab (page 4-418).
bottom surface of spring bracket
(3 ±0.5 mm).
obtained, tighten lock nut (4).
4-21
|
