CHAPTER 3 OPERATOR/CREW MAINTENANCE INSTRUCTIONS

32-5895-248-14&P

CHAPTER 3

O P E R A T O R / C R E W MAINTENANCE INSTRUCTIONS

Section I. TOOLS AND EQUIPMENT

3 - 1 G E N E R A L . Repair parts, tools, test equipment, and

i n the basic issue items list, appendix B, and the repair

accessories issued with or authorized for use by the

parts and special tools list, appendix E.

operator for the Data Analysis Central AN/TYQ-5 are listed

Section Il. LUBRICATION INSTRUCTIONS

3 - 2 G E N E R A L . Lubrication is limited to the sliding and

a. Apply a light film of oil to the chair seat adjusting

rotating parts listed below. For lubrication instructions on

screw and in the chair tiedown pin sliding collar.

o p e r a t i n g components, refer to the applicable technical

b. Apply a light film of dry lubricant to the slides on the

manual listed in appendix A.

drawer of each console work surface.

Section

Ill.

PREVENTIVE

MAINTENANCE

CHECKS

AND

SERVICES

(PMCS)

3 - 3 GENERAL. Operator/crew PMCS will be performed in

b. While You Operate. Always keep in mind the

the order listed in table 3-1. For preventive maintenance of

CAUTIONS and WARNINGS. Perform your during (D)

the vehicle, shelter, or other auxiliary equipment, refer to

PMCS.

the applicable technical manual listed in appendix A.

c. After You Operate. Be sure to perform your after

(A) PMCS.

d . If Your Equipment Fails to Operate. T r o u b l e s h o o t

a . B e f o r e YO u O p e r a t e . A l w a y s k e e p i n m i n d t h e

CAUTIONS and WARNINGS. Perform your before (B)

w i t h proper equipment. Report any deficiencies using the

PMCS.

proper forms. See TM 38-750.

Section IV. TROUBLESHOOTING PROCEDURES

s h o o t i n g operational equipment, refer to the applicable

3-4 GENERAL. Troubleshooting is limited to finding

technical manual listed in appendix A.

faults in the interconnections of components. For trouble-

Section V. MAINTENANCE PROCEDURES

3 - 5 O P E R A T O R ' S M A I N T E N A N C E . Operator's main-

o c c u r r e n c e of trouble, to reduce downtime, and to main-

tenance consists of preventive maintenance end checking

tain equipment in combat serviceable condition. Operator's

e q u i p m e n t . Preventive maintenance is the systematic care,

preventive maintenance is performed daily.

servicing, and inspection of equipmmt to prevent the

3-1