 |
|||
|
|
|||
|
Page Title:
REMOVE/REPLACE POWER SUPPLY ASSEMBLY |
|
||
| ||||||||||
|
|
  TM 11-7025-234-23
INITIAL SETUP
Common Tools
Tool kit
Remove
1. Access modem (para 4-11).
2. Pull ac line plug from rear of modem.
3. Disconnect ground cable from cover
by removing nut and washers.
4. Locate power supply assembly.
5. Remove two screws from the bottom of
unit and one from the side.
CAUTION
Do not pull on cable to disconnect
dc connector. Damage to wire can
result.
6. Disconnect dc connector from mother
board.
7. Lift power supply forward, up and
out of chassis.
Replace
1. Connect dc connector to mother board.
2. Lower power supply into chassis.
3. Install two screws through the
bottom and one into the side.
4. Connect ground cable to cover with
washers and nut.
5. Push ac line plug into modem.
6. Check power supply voltage (para
7. Close up modem (para 4-11).
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals