Chapter 4 ORGANIZATIONAL MAINTENANCE

TM 11-7021-202-12

CHAPTER 4

ORGANIZATIONAL MAINTENANCE

Section I. INTRODUCTION

4-1.

GENERAL

This chapter provides Organizational maintenance instructions and procedures for Data

Processing Set AN/UYK-64 (V). Organizational maintenance is limited to tasks defined in this

chapter. The more difficult tasks are referred to higher levels of maintenance.

At the completion of a repair procedure, turn the processor on and repeat the test originally

used to detect the problem. This ensures that repairs were accomplished satisfactorily and

the unit is operating properly. Refer to paragraph 2-7 for processor turn-on procedures.

Instructions for preparation of the unit for storage and shipment are given in chapter 5.

4-2.

TOOLS AND TEST EQUIPMENT

Tools and test equipment required for Organizational maintenance of the processor are

listed in the Maintenance Allocation Chart (MAC), Appendix B.

4-3.

SPECIAL TOOLS, TMDE, AND SUPPORT EQUIPMENT

There are no special tools, TMDE, or item of support equipment required at this level of

maintenance.

4-4.

REPAIR PARTS

Repair parts are listed and illustrated in TM 11-7021-202-20P.

4-5.

ORGANIZATIONAL MAINTENANCE TASKS

Following is a list summarizing the maintenance tasks to be performed as required by

Organizational maintenance personnel:

q Organizational PMCS

q Troubleshooting

q Equipment removal and replacement

q Cleaning

q Testing after replacements or repairs

4-1/(4-2 Blank)