Figure 2-5. Printed-circuit card assembly strap terminal locations

TM 11-5805-424-15/NAVELEX 0967-220-9010/TO 31W2-2G-41

Figure 2-5. Printed-circuit card assembly strap terminal locations.

b. Single-Channel Terminal Connections (fig. 2-2).

(3) Connect the uncorrected timing signal from

terminals 1,2,and 3 of terminal board TB2 to the

(1) Connect the 115- or 230-volt ac power to

digital data transmit equipment.

terminals 3,4, and 5 of terminal board TB4.

(2) Connect the digital input (to be transmitted to

Note. If security equipment is used

terminals 1, 2, and 3 of terminal board TB1.

(fig. 1-9), connect the uncorrected

timing signal from terminals 10, 11,

Note. The digital input return line

and 12 of terminal board TB1 to the

should be returned to a signal

security transmit equipment.

ground at the signal source end. If it

is not, connect the return line

(4) Connect the digital output (received) from

(terminal 2 of TB1) to the signal

terminals 4, 5, and 6 of terminal board TB1 to

ground at terminal 11 of terminal

the digital data receive equipment.

board TB2 of the MD-674(P)/G.

Change 5

2-5