PERIODIC INSPECTION

based on average use of the equipment under normal

(see Figure 5-13). Thoroughly clean the strainer and the

climatic conditions and should be reduced accordingly

other internal parts of the assembly with dry-cleaning

when the unit is operated continuously for long periods

solvent (Federal Specification P-S-661) and dry with

of time or under adverse conditions.

clean, lint-free cloths. Reassemble the parts and adjust

the assembly in accordance with the instructions In

3.4 LUBRICATION

3.2.6 GASOLINE ENGINE. Clean the engine fuel filter,

3.4.1 After each 50 hours of accrued compressor

carburetor air cleaner and other component parts in

operating time, drain the lubricating oil from the oil

accordance with the instructions contained in Part II of

reservoir and refill with fresh oil in accordance with the

this manual.

lubrication order (figure 3-1) and the following

procedures:

3.3 PERIODIC INSPECTION

a. Remove breather cover and filter assembly (see

3.3.1 Inspect the compressor package assembly in

accordance with Table 2. The Intervals specified are

TABLE 2. PERIODIC INSPECTION