REMOVAL

TM 9-2350-222-34-1

FUEL TANKS (LEFT AND RIGHT) LOWER REAR MOUNT REPLACEMENT (Sheet 2 of 4)

REMOVAL:

1. Using 1/2 inch socket, remove screw and washer (A)

holding ground strap (B) to fuel tank (C).

2. Using 9/16 inch socket, remove two screws, washers

and nuts (D) holding bracket (E) to hull bracket (F).

3. Remove ground strap (B).

4. Using two 1/2 inch wrenches, remove six screws,

washers, and nuts (G) holding bracket (H) to fuel

tank (C).

NOTE

There may be extra washers (N) added between

rubber mount (Q) and upper bracket (H) to raise

fuel tank.

5. Using 15/16 inch socket on screw (J) and 15/16 inch

wrench on nut (K), remove screw (J), washer (L), nut

(K), lockwasher (M), washer (N), and rubber mount

(P).

6. Remove rubber mount (Q) and washer (N) between

holding brackets (E and H).

Go on to Sheet 3

TA 130488

4-24