REPAIR

TM 9-2350-222-34-1

AIR CLEANER FAN REPAIR (Sheet 5 of 11)

NOTE

There are two different types of motors. The early model motor can be repaired

with a parts kit and is identified by the number 10905006 stamped into the brush

end of the motor. The late model motor, which is not repairable, can be identified

by the number 12270348 stamped into the brush end of the motor. After testing, if

the late model motor is defective, replace it. If the early model motor is found

defective, repair as indicated below.

REPAIR:

1. Using 1/4 inch screwdriver, remove screw (A) and

lockwasher (B) securing brush leads.

2. Using pliers, release two brush springs holding

brushes (C) in place.

3. Pull two brushes (C) from holders (D) and throw

brushes away.

4. Make alinement marks on front end (E) to match

lines on housing.

Go on to Sheet 6

TA130470

4-6