DISASSEMBLY-continued

TM 9-2350-222-34-1

AIR CLEANER FAN REPAIR (Sheet 2 of 11)

5. Remove preformed packing (J) from motor.

6. Using 1/4 inch screwdriver, remove screw and

washer (K) securing ground strap (L).

7. Using 1/4 inch screwdriver, remove screw and

washer (M), securing retaining strap (N), brush lead

(P), and power lead (Q).

8. Slide insulator (R) aside to expose lead connector.

Pull leads (Q) apart and remove insulator (R).

9. Using 1/4 inch screwdriver, remove four screws (S)

and lockwashers (T) securing capacitor and leads

(U). Pull leads and capacitor (U) out from housing

(D).

10. Remove packing (V) from capacitor and leads (U).

Throw packing away.

11. Holding motor (W) in one hand, tap housing (D) with

hammer to loosen motor from housing. Remove

motor (W) from housing (D).

Go on to Sheet 3

TA130467

4-3