INSTALLATION-continued

TM 9-2350-222-34-1

ENGINE REPLACEMENT (2D ENGINE) (Sheet 15 of 18)

21. Position left air cleaner hose and elbow assembly (AD) onto turbocharger (AE), and using 1/2 inch wrench, install eight

flat washers, lockwashers, and nuts (AF) securing air cleaner hose and elbow assembly to turbocharger (AE).

22. Using procedure described in step 21, install

right air cleaner hose and elbow assembly.

NOTE

Perform steps 23, 24,

and 25 only if you are

replacing a 2D engine.

23. Position exhaust pipe gasket (AG) and right

exhaust pipe (AH) onto exhaust flange (AJ), and

using ½ inch socket, install six nuts (AK) securing

right exhaust pipe (AH) to flange (AJ).

24. Using procedure described in step 23, install left

exhaust pipe.

25. Position transmission vent line (AL) onto

transmission, and using 7/8 inch wrench, secure

line (AL) by tightening connecting nut (AM) and

connecting nut (AN).

Go on to Sheet 16

TA248760

Change 2 3-32