INSTALLATION-continued

TM 9-2350-222-34-1

ENGINE REPLACEMENT (2D ENGINE) (Sheet 13 of 18)

13. Position linkage (Q) (long piece) onto cross

shaft (R), and using 7/16 inch wrench to hold

nut (S), use 7/16 inch wrench to install screw

(T) through linkage (Q).

14. Position linkage (U) (short piece) onto cross

shaft (R), and using 7/16 inch wrench to hold

nut (V), use 7/16 inch wrench and install

screw (W) through linkage (U).

15. Using 1 inch wrench, install tachometer

adapter (X).

16. Using ¾ inch wrench, connect quick disconnect

coupling (Y) to fuel check valve (Z).

Go on to Sheet 14

TA130461

3-30