INSTALLATION-continued

TM 9-2350-222-34-1

ENGINE REPLACEMENT (2D ENGINE) (Sheet 11 of 18)

3. Using hands, feed cannon plug (C) through shroud

and secure grommet (D) to shroud.

4. Using transmission sling and a suitable hoist (transmission weighs approximately 3,000 pounds), aline transmission

dowel pins with engine and carefully advance transmission until transmission mounting flange is in contact with engine

transmission adapter.

5. Using fabricated wrench and 5/8 inch socket, install

and tighten screw (E), washer (F), and nut (G) on left

and right side of transmission/engine.

6. Using fabricated wrench or 5/8 inch wrench, install

and tighten 17 screws (H), lockwashers (J), and flat

washers (K) securing transmission to engine flange.

7. Remove transmission sling from transmission.

Go on to Sheet 12

Change 3 3-28