INSTALLATION

TM 9-2350-222-34-1

ENGINE REPLACEMENT (2D ENGINE) (Sheet 10 of 18)

INSTALLATION:

WARNING

Make sure powerplant is level and will not move.

1. Using engine and transmission sling and suitable hoist (engine weighs approximately 5,000 pounds), remove

replacement engine from container and place on two 10 x 10 x 12 inch wooden blocks. Position blocks under each

end of engine oil pan. Remove sling from engine.

NOTE

Remove shipping caps, plugs, covers, and mounts from replacement engine as

components are installed and install them on unserviceable engine.

2. Position new preformed packing (A) on transmission mounting flange (B).

Go on to Sheet 11

Change 3 3-27