REMOVAL-continued

TM 9-2350-222-34-1

ENGINE REPLACEMENT (2D ENGINE) (Sheet 7 of 18)

20. Using 1/2 inch socket and 5 inch extension, remove

six nuts (AJ) from right exhaust pipe flange (AK).

Remove exhaust pipe (AL) and gasket (AM) from

turbocharger.

21. Using procedures described in step 20, remove left

exhaust pipe.

WARNING

Cover all openings to prevent

entrance of foreign material to

prevent damage to engine.

22. Using spanner wrench, disconnect cannon plug

(AN).

23. Using hands, feed wiring harness (AP) through

grommet (AQ) until cannon plug (AN) is flush with

grommet (AQ).

24. Remove engine wiring harness (TM 9-2350-222-20-1).

Go on to Sheet 8

TA249095

Change 2 3-24