FRAME 1

TM 9-2350-222-20-2-3-2

HINGED PLATE REMOVAL PROCEDURE (CONT)

19-8.

FRAME 1

Procedure

Step

Traverse turret until periscope stowage box (1) can be reached from driver's compartment

(TM-10)

Set turret traverse lock to LOCKED (TM-10).

Open two latches (2) and open door (3).

Open door (4) to provide access to nuts (5).

NOTE

Flat washers (6) under hinged plate (7) are used as

shims to keep rubber pad of hinged plate against

periscope head. The number of flat washers must be

marked with pencil on periscope stowage box (1) near

all four flat washer locations to help put them back

( para 19-9 ). Also, use pencil to mark top of hinged plate

near top holes so it can be put back in same position

Using screwdriver and wrench, remove two screws ( 8), two lockwashers (9), two nuts (5)

and flat washers (6) that attach hinged plate (7) to door (4).

Open two latches (10) and open door (11).

Using screwdriver and wrench. remove two screws ( 8), two lockwashers ( 9). two nuts (5)

and flat washers (8) that hold hinged plate (7) on periscope stowage box (1). Remove

hinged plate.

Close doors (4), (3), and (11).

END OF TASK

Para 19-8 Cont

19-16