 |
|||
|
|
|||
|
Page Title:
BOTTOM FRONT DOOR REMOVAL PROCEDURE |
|
||
| ||||||||||
|
|
  TM 9-2350-222-262-3-2
19-6.
BOTTOM FRONT DOOR REMOVAL PROCEDURE
TOOLS: Cross tip screwdriver ( Phillips)
318" open end wrench
Hammer
Cold chisel ( 1 /4" w cut, 4" lg)
PERSONNEL: One
REFERENCES: TM 9-2350-222-10 for procedures to:
Traverse turret
Set turret traverae lock to LOCKED
JPG for procedure to remove rivets
EQUIPMENT LOCATION INFORMATION:
FOLDOUT
CALLOUT
EQUIPMENT
11
Driver's Master Control Panel
7
Turret Traverse Lock
9
Periscope Stowage Box
EQUIPMENT CONDITION: Driver's master control panel MASTER BATTERY switch set to OFF
Periscope head removed from bottom compartment
Procedure
Step
1.
Traverse turret until periscope stowage box (1) can be reached from driver's compartment
(TM-10).
2.
Set turret traverse lock to LOCKED (TM- 10).
Open two latches (2) and open bottom front door (3) of periscope stowage box
3.
1).
NOTE
If door ( 3 ) is attached to hinge (4) with rivets (5), go to
step 5. If not, do step 4 only.
4.
Using screwdriver and wrench, remove six screws (5) and six nuts (6) that hold door (3)
on hinge (4) of periscope stowage box (1). Remove door.
5.
Using hammer and chisel, remove six rivets (5) that hold door (3) to hinge (4) of
periscope box (1) (JPG ).
6.
Remove door (3).
END OF TASK
Para 19-6
19-10
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals