SECTION 2 SERVICE UPON RECEIPT OF EQUIPMENT

TM 9-2350-222-20-2-1

SECTION 2 SERVICE UPON RECEIPT OF EQUIPMENT

1-10.

SCOPE

This chapter contains procedures to be done when receiving an engineer vehicle that has been prepared

for shipment. Whenever practicable, the crew will assist in doing the procedure outlined in this chapter.

SERVICE UPON RECEIPT OF EQUIPMENT

1-11.

Waste wiping cloths

SUPPLIES:

Cleaning solvent (PD 126)

Pencil and paper

PERSONNEL: Two

TM 9-2350-222-10 for procedures to:

REFERENCES:

Inspect, install, and operate turret fire control/armament equipment

TM 9-2350-222-20-2-3 for equipment installation procedure

LO 9-2360-222-12 for lubrication procedures

REFERENCE

PROCEDURE

Open each container. Check items in container against

packing list and write down any missing items.

TM 9-2350-222-10 for basic issue item

Check packing list against basic issue items list to make sure

list

all items in list have been received.

Open inner packages. Remove preservative material from

equipment.

Visually check equipment for damage.

TM 9-2350-222-10

Prepare armament equipment for installation:

a. Clean pants with cleaning compound PD 126.

b. Lubricate parts.

Remove preservative material (wrapping, barrier material,

tape) from hatches, periscope openings, cupola vision blocks,

and gun openings.

GO TO FRAME 2

Para 1-10

1-3

Change 3