TM 9-2350-222-20-1-5
EXTERIOR RELEASE HANDLE CONTROL ASSEMBLY REPLACEMENT (Sheet 4 of 5)
5.
Using 5/16 inch wrench, secure control housing
(B) to bracket tube (D).
6.
Using 9/16 inch wrench, install nut (E) onto
control housing (B).
7.
Route cable (A) and control housing (B) through
bracket (F).
8.
Install nut (G) onto control housing (B).
9.
Using two 9/16 inch wrenches, tighten nuts
(E) and (G) to secure control housing (B) to
bracket (F).
Go on to Sheet 5
TA140908
21-5